Caution when working with electricity!
The insulated screwdriver Electro Tool conforms to regulation IEC 60 900 applying to insulated tools
for working with voltages up to 1000AC / 1500DC. At the sametime, it should not be used on any
implement that is electrified.
ESD tools are not insulated and therefore cannot be used for electrical work. They are easily iden-
tified, compared to the normal PB Swiss Tools electrical screw drivers,as they havea rotating black
cap and yellow inscription. They can´t be usedwhen electricity is present!
Hold the screw driver end on the source of current and at the same time, the gripend between the
fingers. Make sure that earthing is possible! The small light inside the grip lights-up when a current
is present. Before using, check to see that the solenoid voltmeter is functioning properly. It should
not be used when it could be affected by lightning, dew or rain. It should be in a dry state when being
used. Its sole function is for checking voltage and not for any other form of work on implements that
are electrified. Pay close attention at all times to personel safety while working.